MBE 900

Section 2.13 Fuel Temperature Sensor

Section 2.13
Fuel Temperature Sensor

The Fuel Temperature Sensor is located on the front left side of the engine. See Figure "Location of Engine Fuel Temperature Sensor" .‪

Click to see this graphic in a separate window

 1. Fuel Temperature Sensor‪

 3. Engine Trim Panel‪

 2. Wiring Harness‪

Figure 1. Location of Engine Fuel Temperature Sensor

Section 2.13.1
Fuel Temperature Sensor Removal

Remove the Fuel Temperature Sensor as follows:‪

  1. Remove the engine trim panel.
  2. Disconnect the wiring harness from the fuel temperature sensor.
  3. Remove the fuel temperature sensor and if inoperable, then discard.

Section 2.13.2
Fuel Temperature Sensor Installation

Install the Fuel Temperature Sensor as follows:‪

  1. Install or mount the new fuel temperature sensor.
  2. Connect the wiring harness to the sensor.
  3. Reinstall the engine trim panel.


MBE 900 Service Manual - 6SE414
Generated on 10-13-2008

Leave a Reply

Your email address will not be published. Required fields are marked *