SPN 247/FMI 0
MCM engine hours data higher than expected – This fault usually occurs after reprogramming the CPC or MCM. The internal clocks of the CPC or MCM do not match. After reprogramming either module, all fault codes must be cleared.
Note: The CPC digital outputs have the same SPN as some MCM faults. DDDL 7.0 makes the distinction between the MCM and CPC when diagnosing a fault.
|EPA07 MBE 4000 DDEC VI Troubleshooting Guide - 6SE568|
|Generated on 10-13-2008|