MBE 900 4000 Troubleshooting

Section 32.2 Troubleshooting SID 254

Section 32.2
Troubleshooting SID 254

The following procedure will troubleshoot SID 254.‪

Section 32.2.1
254 12 – DDEC-VCU Internal Error

Perform the following steps to troubleshoot 254 12, DDEC-VCU internal error.‪

  1. Reset the DDEC-VCU.

    Note: Turning the ignition off for more than 10 seconds will reset the DDEC-VCU.

  2. Check for active fault codes.
    1. If fault code 254 12 is no longer active, erase fault code memory.
    2. If fault code 254 12 is still active, go to step 3 .
  3. Check for other active fault codes.
    1. If there are other active fault codes, refer to their appropriate sections.
    2. If there are no other fault codes, replace the DDEC-VCU. Erase fault code memory.


MBE 900/4000 Troubleshooting Guide - 6SE422
Generated on 10-13-2008

Leave a Reply

Your email address will not be published. Required fields are marked *