Section 5.12
Restrictive Air Filter
To determine if a restrictive air filter is causing starting difficulty, perform the following steps:
- Remove the air filter element; refer to OEM guidelines.
PERSONAL INJURY
To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake is set, and the wheels are blocked.
- Attempt to start and run the engine.
- If the engine starts and runs, no further engine troubleshooting is required. Shut down the engine.
- If the engine fails to start and run, refer to "5.12.1 Air Filter Replacement" .
Section 5.12.1
Air Filter Replacement
Perform the following steps for air filter replacement:
- Visually inspect the air filter for clogging and replace as necessary; refer to OEM guidelines.
- Visually inspect gaskets for deterioration and replace as necessary; refer to OEM guidelines.
- Visually inspect air inlets for restrictions and clean as necessary; refer to OEM guidelines.
- Verify air filter replacement; refer to "5.12.1.1 Test Engine with Replaced Air Filter" .
Section 5.12.1.1
Test Engine with Replaced Air Filter
To determine if the replaced air filter resolved starting difficult, perform the following steps:
PERSONAL INJURY |
To avoid injury before starting and running the engine, ensure the vehicle is parked on a level surface, parking brake is set, and the wheels are blocked. |
- Attempt to start the engine, if the engine starts and runs, no further troubleshooting is required. Shut down the engine.
- If the engine fails to start and run, check compression; refer to "5.13 Low Compression" .
EPA07 MBE 900 DDEC VI Troubleshooting Guide - 6SE580 |
Generated on 10-13-2008 |