Email This Page Section 10.2 Sufficient Clean Fuel Figure 1. Diagnostic Form The sufficient clean fuel procedure determines if the fuel system is getting sufficient…
Category: Series 40E Troubleshooting
Email This Page Section 10.1 Introduction The following pages have supporting information and instructions for the combined Hard Start/No Start diagnostics. Detailed instructions are included…
Email This Page Section 9.3 Diagnostic Form Instructions Record the test data in the actual box of the EST Tool — Data List. If there…
Email This Page Section 9.2 Instructions Before performing any of the diagnostic procedures, fill in the information requested at the top of the diagnostic forms.…
Email This Page Section 9.1 Introduction Almost any mechanical problem can be accurately diagnosed under ideal conditions; but, accurate diagnosis can become the norm under…
Email This Page Section 8.4 Operator On Demand Tests, Engine Running The following tests are performed with the engine running: Section 8.4.1 Standard Test, Engine…
Email This Page Section 8.3 Operator On Demand Tests, Engine Off The following tests are performed with the engine OFF: Section 8.3.1 Standard Test (KOEO…
Email This Page Section 8.2 Continuous Monitor Diagnostics are performed by the ECM continuously to detect out of range rationality and system faults. During the…
Email This Page Section 8.1 Diagnostic Software Test The following flow chart will enable diagnostic fault code detection: See Figure “Diagnostic Software Test Chart” .…
Email This Page Section 7.2 Optional Features Optional features on the Series 40E engine include the following: Section 7.2.1 Cruise Control Cruise Control provides vehicle…