Email This Page Section 10.5 Engine Oil Level Check Figure 1. Diagnostic Form The engine oil level check determines if the crankcase contains engine oil…
Category: Series 40E Troubleshooting
Email This Page Section 10.4 Air Induction System The air induction system must be visually inspected. Section 10.4.1 Air Induction System Inspection Follow this procedure…
Email This Page Section 10.3 Visual Inspection Figure 1. Diagnostic Form Visually inspect the general condition of the engine and look for obvious causes of…
Email This Page Section 10.2 Sufficient Clean Fuel Figure 1. Diagnostic Form The sufficient clean fuel procedure determines if the fuel system is getting sufficient…
Email This Page Section 10.1 Introduction The following pages have supporting information and instructions for the combined Hard Start/No Start diagnostics. Detailed instructions are included…
Email This Page Section 9.3 Diagnostic Form Instructions Record the test data in the actual box of the EST Tool — Data List. If there…
Email This Page Section 9.2 Instructions Before performing any of the diagnostic procedures, fill in the information requested at the top of the diagnostic forms.…
Email This Page Section 9.1 Introduction Almost any mechanical problem can be accurately diagnosed under ideal conditions; but, accurate diagnosis can become the norm under…
Email This Page Section 8.4 Operator On Demand Tests, Engine Running The following tests are performed with the engine running: Section 8.4.1 Standard Test, Engine…
Email This Page Section 8.3 Operator On Demand Tests, Engine Off The following tests are performed with the engine OFF: Section 8.3.1 Standard Test (KOEO…