Series 50

Section 29.3 Crankcase Pressure Test (Governed Speed No Load)

Section 29.3
Crankcase Pressure Test (Governed Speed No Load)

Perform the following steps to perform pressure test:‪

  1. Attach a manometer, calibrated to read in. H2 O, to the oil dipstick opening.
  2. Start and run the engine.
  3. Operate the engine at maximum run-in speed.
  4. Record the results.
  5. Shut down the engine.
  6. Remove the manometer from the oil dipstick opening.


Series 50 Service Manual - 6SE50
Generated on 10-13-2008

Leave a Reply

Your email address will not be published. Required fields are marked *