Series 60 DDEC V Troubleshooting

Section 39.1 Description of Flash Code 35

Section 39.1
Description of Flash Code 35

The SAE J1587 equivalent code for Flash Code 35 is p 100/3, oil pressure circuit high.‪

Note: Code 35 p 100/3 is logged if oil pressure is high, engine is warm, and engine is at idle.

Flash Code 35 p 100/3 indicates that the engine Oil Pressure Sensor/Engine Oil Pressure Sensor (OPS/EOP Sensor), see Figure "Engine Oil Pressure Sensor" , input to the ECM/ECU has exceeded 95% (normally > 4.75 volts) of the sensor supply voltage.‪


Series 60 DDEC V Troubleshooting Guide - 6SE570
Generated on 10-13-2008

Leave a Reply

Your email address will not be published. Required fields are marked *