Section 2.2
Defective Magnetic Switch
Check as follows:
ENGINE EXHAUST |
To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic. |
- Clamp a heavy gage battery jumper cable between the two large studs of the magnetic switch (1). Try to start the engine.
- If the engine cranked with the jumper cable in place, the magnetic switch must be replaced; go to step 3 .
- If the engine did not crank with the jumper cable in place, check the starter; refer to "2.3 Defective Starter" .
- Replace the magnetic switch (1). Refer to OEM guidelines.
ENGINE EXHAUST
To avoid injury from inhaling engine exhaust, always operate the engine in a well-ventilated area. Engine exhaust is toxic.
- To determine if the magnetic switch replacement resolved the no start condition, attempt to start and run the engine.
- If the engine starts and runs, no further troubleshooting is required. Shut down the engine.
- If the engine fails to start or rotate, check the starter; refer to "2.3 Defective Starter" .
EPA07 DD15 Troubleshooting Guide - DDC-SVC-MAN-0029 |
Generated on 10-13-2008 |