Section 2.9
Cruise Control Circuit
The following is a list of switches and DDEC-VCU sensors that are required for Cruise Control operation:
- Cruise Control ON/OFF (Switch or J1939)
- Service Brake (Switch or J1939)
- Clutch Released for Manual Transmission (Switch or J1939)
- Set/Coast (Switch or J1939)
- Resume/Accel (Switch or J1939)
- Vehicle Speed Sensor (or J1939)
See Figure "Cruise Control Circuit" for a diagram of the cruise control circuit.
Figure 1. Cruise Control Circuit
MBE 900/4000 Troubleshooting Guide - 6SE422 |
Generated on 10-13-2008 |