Section 5.1
Discharged Battery
To determine if a discharged battery is causing the engine not to start, measure and record the voltage at the battery terminals; refer to OEM guidelines.
- If the voltage recorded is below OEM specifications and the engine failed to start, replacement is necessary; refer to "5.1.1 Discharged Battery Resolution" .
- If the voltage recorded is at recommended OEM specifications and the engine failed to start, check the magnetic switch; refer to "5.2 Defective Magnetic Switch" .
Section 5.1.1
Discharged Battery Resolution
Perform the following steps for battery replacement:
- Replace the battery; refer to OEM guidelines.
- Verify replacement of the battery; refer to "5.1.1.1 Test Engine with New Battery" .
Section 5.1.1.1
Test Engine with New Battery
To determine if the new battery resolved the no start condition, attempt to start and run the engine.
- If the engine starts and runs, no further troubleshooting is required. Shut down the engine.
- If the engine fails to start or run, check the magnetic switch; refer to "5.2 Defective Magnetic Switch" .
| Series 60 DDEC V Troubleshooting Guide - 6SE570 |
| Generated on 10-13-2008 |