MBE 900 DDEC VI Troubleshooting – Section 29.1 SPN 110/FMI 0

Section 29.1
SPN 110/FMI 0

The diagnostic condition is typically engine coolant temperature high.‪

Section 29.1.1
System Checks to Resolve Fault

Check as follows:‪

1. Turn the ignition ON.
2. Plug in the DDDL 7.0.
3. Check for active codes.
   1. If fault 110/3 is active in addition to 110/0, refer to "29.2 SPN 110/FMI 3" .
   2. If fault 110/4 is active in addition to 110/0, refer to "29.3 SPN 110/FMI 4" .
   3. If only fault code 110/0 is active, refer to Chapter "14 High Engine Coolant Temperature" 14 in this manual or refer to Chapter "4 Cooling System" 5 in the EPA07 MBE900 Service Manual (6SE9007)..