MBE 900 DDEC VI Troubleshooting – Section 29.6 SPN 110/FMI 16

Section 29.6
SPN 110/FMI 16

The diagnostic condition is typically engine coolant temperature high.‪

Section 29.6.1
System Checks to Resolve Fault

Check as follows:‪

1. Turn the ignition ON (key ON, engine OFF).
2. Plug in DDDL 7.0.
3. Read active codes:
   1. If only fault code 110/16 is active, refer to Chapter "14 High Engine Coolant Temperature" 14 in this manual or refer to Chapter "4 Cooling System" 5 in the EPA07 MBE900 Service Manual (6SE9007).
   2. If fault code 110/3 is active in addition to fault code 110/16, refer to "29.2 SPN 110/FMI 3" .
   3. If fault code 110/4 is active in addition to fault code 110/16, refer to "29.3 SPN 110/FMI 4" .