Section 11.6
Series 50G Operating Conditions
Listed in Table "Engine Operating Conditions for the Series 50G Engine" are the engine operating conditions specifications.
|
System |
Spec |
|
Fuel System |
|
|
Maximum Fuel Inlet Temperature - °F (°C) |
140 (60) |
|
Minimum Fuel Inlet Temperature - °F (°C) |
32 (0) |
|
Maximum Fuel Inlet Pressure to Metering Valve @ Idle - lb/in2 (kPa) |
150 (1034) |
|
Minimum Fuel Inlet Pressure to Metering Valve @ Idle - lb/in2 (kPa) |
120 (827) |
|
Fuel Filter, Primary |
Coalescing, 1 micron |
|
Fuel Filter, Secondary |
Coalescing, 1 micron |
|
Lubrication System |
|
|
Oil Pressure at Rated Speed - lb/in2 (kPa) |
50 (345) |
|
Oil Pressure at Low Idle - lb/in2 (kPa) |
12 (83) |
|
In Pan Oil Temperature - °F (° C) |
235 (113) |
|
Oil Pan Capacity, High Limit - qt (L) |
22 (21) |
|
Oil Pan Capacity, Low Limit - qt (L) |
19 (18) |
|
Total Engine Oil Capacity with Filters - qt (L) |
28 (26) |
|
Oil Filter, Two Full Flow - microns |
28 |
|
Cooling System |
|
|
Thermostat: |
|
|
Start to Open - °F (° C) |
186 (86) |
|
Fully Open - °F (° C) |
207 (97) |
|
Maximum Water Pump Inlet Restriction - in. Hg (kPa) |
0 (0) |
|
Engine Coolant Capacity - gal (L) |
17 (117) |
|
Minimum Pressure Cap - lb/in2 (kPa) |
9 (62) |
|
Maximum Coolant Pressure (Exclusive of Pressure Cap) - lb/in2 (kPa) |
10 (69) |
|
Maximum Top Tank Temperature - °F (° C) |
210 (99) |
|
Minimum Top Tank Temperature - °F (° C) |
160 (71) |
|
Air System |
|
|
Maximum Ambient to Turbo Compressor Inlet Temperature Rise - °F (° C) |
30 (16.7) |
|
Maximum Air Intake Restriction: |
|
|
Dirty Air Cleaner - in. H2 O (kPa) |
20 (5) |
|
Clean Air Cleaner - in. H2 O (kPa) |
12 (3) |
|
Engine Manifold Pressure - in. Hg (kPa) |
38.5 (130) |
|
Maximum Charge Air Cooler System Total Pressure Drop - in. H2 O (kPa) |
41 (10.2) |
|
Maximum Ambient to Intake Manifold Temp. - °F (° C) |
30.0 (16.7) |
|
Maximum Crankcase Pressure - in. H2 O (kPa) |
2 (0.5) |
|
Exhaust System |
|
|
Exhaust Flow: |
|
|
Rated Speed - ft3 /min (m3 /min) |
1680 (47.6) |
|
Peak Torque Speed - ft3 /min (m3 /min) |
1090 (30.9) |
|
Exhaust Temperature: |
|
|
Rated Speed - °F (°C) |
1110 (600) |
|
Peak Torque Speed - °F (°C) |
1065 (575) |
|
Maximum Back Pressure - in. Hg (kPa) |
2.4 (8.1) |
| Series 50 Service Manual - 6SE50 |
| Generated on 10-13-2008 |