Section 12.6
Series 60G Automotive Engine Operating Conditions
Listed in Table "Engine Operating Conditions for the Series 60G Automotive Engine" are the engine operating conditions specifications.
SYSTEM |
SPEC |
Fuel System |
|
Maximum Fuel Inlet Temperature - °C (°F) |
70 (158) |
Minimum Fuel Inlet Temperature - °C (°F) |
-40 (-40) |
Maximum Fuel Inlet Pressure to Regulator @ Idle - kPa (psi) |
1448 (210) |
Minimum Fuel Inlet Pressure to Regulator @ full load - kPa (psi) |
482 (70) |
Fuel Filter, Primary |
Coalescing 1 micron |
Fuel Filter, Secondary |
Coalescing 1 micron |
Lubrication System |
|
Oil Pressure at Rated Speed - kPa (lb/in2 ) |
345(50) |
Oil Pressure at Low Idle - kPa (psi ) |
83 (12) |
In Pan Oil Temperature - °C (°F) |
113 (235) |
Oil Pan Capacity, High Limit - L (qt) |
30 (32) |
Oil Pan Capacity, Low Limit - L (qt) |
25 (26) |
Total Engine Oil Capacity with Filters - L (qt) |
36 (38) |
Oil Filter, Two Full Flow - microns |
28 |
Cooling System |
|
Thermostat: |
|
Start to Open - °C (°F) |
86 (186) |
Fully Open - °C (°F) |
97 (207) |
Maximum Water Pump Inlet Restriction - kPa (in. Hg) |
0 (0) |
Engine Coolant Capacity - L (qt) |
23 (24) |
Minimum Pressure Cap - kPa (lb/in2 ) |
48(7) |
Maximum Coolant Pressure (Exclusive of Pressure Cap) - kPa (psi) |
69 (10) |
Maximum Top Tank Temperature - °C (°F) |
99 (210) |
Minimum Top Tank Temperature - °C (°F) |
71 (160) |
Air System |
|
Maximum Ambient to Turbo Compressor Inlet Temperature Rise - °F (°C) |
30 (16.7) |
Maximum Air Intake Restriction: |
|
Dirty Air Cleaner - kPa (in. H2 O) |
5 (20) |
Clean Air Cleaner - kPa (in. H2 O) |
3 (12) |
Engine Manifold Pressure - kPa (in. Hg) |
146 (43) |
Maximum Charge Air Cooler System Total Pressure Drop - kPa (in. H2 O) |
10 (41) |
Maximum Ambient to Intake Manifold Temp. - °F (°C) |
30.0 (16.7) |
Maximum Crankcase Pressure - kPa (in. H2 O) |
0.5 (2) |
Exhaust System |
|
Exhaust Flow: |
|
Rated Speed - m3 /min (ft3 /min) |
55 (1961) |
Peak Torque Speed - m3 /min (ft3 /min) |
35 (1250) |
Exhaust Temperature: |
|
Rated Speed - °C (°F) |
600 (1110) |
Peak Torque Speed - °C (°F) |
575 (1065) |
Maximum Back Pressure - kPa (in. Hg) |
8 (2.4) |
Series 60 Service Manual - 6SE483 |
Generated on 10-13-2008 |