Section 6.3
Broken Injector Follower Spring and Damaged Stator With Broken Stator Screws
For a broken injector follower spring and damaged stator with broken stator screws, see Figure "Broken Injector Follower Spring And Damaged Stator With Broken Stator Screws Failure" .
Figure 1. Broken Injector Follower Spring And Damaged Stator With Broken Stator Screws Failure
COMPLAINT: Slapping or rapping noise and/or fuel in oil.
CAUSE: Injector follower spring failure.
CORRECTION: Replace spring, using kit number 23528939 and publication number 18SP532 (only applies to old series 60 injector, not N3). If stator is damaged, replace unit injector.
RECOMMENDATION: Check the springs in the remaining injectors.
| Unit Fuel Injectors and Unit Pumps Technician's Guide - 7SE500 |
| Generated on 10-13-2008 |