Section 6.4 Loose Stop Plate Screw

Section 6.4
Loose Stop Plate Screw

For a loose stop plate screw, see Figure "Loose Stop Plate Screw Failure" .‪

Click to see this graphic in a separate window

Figure 1. Loose Stop Plate Screw Failure

COMPLAINT: Fuel in Oil.‪

CAUSE: Pinched O-ring under torqued screw, backed out stop plate screw.‪

CORRECTION: Replace unit injector.‪

RECOMMENDATION: Check remaining injector stop plate screws if injectors are original installation.‪

Unit Fuel Injectors and Unit Pumps Technician's Guide - 7SE500
Generated on 10-13-2008

Leave a Reply

Your email address will not be published. Required fields are marked *