Section 6.10
High Pressure Plug Leak
For a high pressure plug failure, see Figure "High Pressure Plug Leak" .
Figure 1. High Pressure Plug Leak
COMPLAINT: Fuel in oil.
CAUSE: Fatigue, bad braze.
CORRECTION: Replace Unit Injector.
RECOMMENDATION: Check remaining injectors for correct pressure using a pop ‘n’ fixture, tool number J-34760-A and for leaking or absence of plugs.
| Unit Fuel Injectors and Unit Pumps Technician's Guide - 7SE500 |
| Generated on 10-13-2008 |